failure casues&resolving methods
故障现象
failures
原 因
reas
消 除
方 法
methods
1、水泵不出水
no water are
runing out
1、引水不够真空泵抽吸空气不尽
2、进水管路进气
3、水泵转速太低
4、吸程太高
5、水泵转向不对
6、输水高度超过规定
1.the diversion is not engouth/the
vacuum pump does not remove all air
2.air suction for inlet pipes
3.the rotate speed of pump is too low
4.suction head is too high
5.the turnning direction is not right
6.water delivery ht= exceeds stated
one.
1、继续加灌或抽气
2、检查并堵塞之
3、用转速表检查予以调整
4、降低安装位置减少吸程
5、改变旋转方向
6、减少输水高度
1.continue filling/removing air
2.check&seal it
3.check by tachometer&adjust it
4.reduce the installation po ition,
reduce the suction head
5.change the turnning direction
6. reduce water delivery ht=
深井潜水泵
首先看一下水泵此时运行的电流和平常运行时候的电流差别有多大。如果比平时运行时候小(基上就是平时电流的2﹨3),工业混流泵生产厂家,那么就有叶轮磨损、泵头上面的止逆阀堵塞等问题。如果和平时电流一样大,那么就是管垫漏水、管子漏水、泵体漏水等问题。如果比平时运行的时候电流大,工业混流泵供应商,那么基上可以确定是易损件磨损的问题。另外补充一点,工业混流泵价格,电缆如果破损的话,吉林工业混流泵,水量跟平时是一样大,但是电流会变大。3相380v电机的电流一般是2.2a。以上原因只要是经常维修深井泵的修理人员就可以查出来。
(一)hw型混流泵由泵体、泵盖、叶轮、泵轴和轴承体等主要零件构成。
i. hw mixed-flow
pump is composed of pump casing, pump cover, impeller, pump spindle&bearing
body mainly.
水泵转向从水泵进水口看叶轮为逆时针方向旋转(即箭头所示方向旋转。)
v. pump diversion
look from inlet of pump, the impeller is
turning clockwise(turning as the direction indicated by rotation arrow)
吉林工业混流泵-工业混流泵价格-金石泵业(商家)由泰安金石泵业有限公司提供。泰安金石泵业有限公司(www.tajsby.cn)为客户提供“水泵,泥浆泵,混流泵,轴流泵,渣浆泵”等业务,公司拥有“金石泵业”等品牌,---于污水泵、杂质泵等行业。欢迎来电垂询,联系人:刘经理。
联系我们时请一定说明是在100招商网上看到的此信息,谢谢!
本文链接:https://tztz260144a1.zhaoshang100.com/zhaoshang/209300337.html
关键词: