淮北雨水混流泵-泰安金石泵业公司-雨水混流泵采购价

（二）泵盖是泵与进水管相连的零件，其端面与叶轮之间留有规定的轴向端面间隙（在消除轴承轴向活动间隙以后，保持规定的轴向间隙）。间隙过小产生磨擦，雨水混流泵价格，过大则会导致泵内压力水回流，雨水混流泵厂家，使泵的效率降低，通过增减调整纸垫达到规定的间隙。

ii.  pump cover is

the part connected with water inlet pipe.there is an stated axial end face gap

between its end

face and

impeller(keep the stated axail gap after removing the bearing axial movable

gap).friction will be

produced if

the gap is too small， contrary， if the gap is too large， the pressure water in

pump will reflux which

makes the

feeiciency reduced.adjust the --- washer&make the gap be stated one.